
Age and the kind of failure decide it. Under eight years with a failed part is usually a repair; a leaking tank body is always a replacement. JK Plumbing handles water heater repair, replacement and installation across San Francisco and Daly City. Call (415) 359-4588.
By Alik, Owner & Master Plumber · Last updated November 2026
Four questions, in order. The first two settle most cases before anyone opens a toolbox.
How old is it? The data plate on the side carries a serial number with the manufacture date encoded in it. A tank under eight years old is generally worth repairing. Between eight and twelve, it depends on what failed and what it costs to fix. Past twelve, you are repairing something that owes you nothing, and the money is usually better spent on the replacement you’ll be doing within a year or two anyway.
Where is the water coming from? This is the question that overrides the first one. Water from a fitting, a valve or a connection is a repair. Water weeping from the tank body itself is a replacement, every time, at any age — the steel has corroded through from the inside and there is no repair for that.
What actually failed? Thermocouples, igniters, gas control valves, heating elements, thermostats and anode rods are all replaceable parts. Tank corrosion, a cracked flue and a failed internal dip tube on an older unit generally are not worth chasing.
Is it even the heater? More often than people expect, it isn’t. A crossover at a mixing valve or a failing fixture cartridge produces symptoms that look exactly like a dying water heater, and replacing the heater fixes nothing. If your hot water went lukewarm everywhere at once without the unit showing any other sign of trouble, start with the diagnosis rather than the heater.
And a distinction worth drawing because it changes the permit and the quote: replacement is swapping a unit for one in the same place. Installation is putting a water heater where there wasn’t one, or not in that spot — a new bathroom, an ADU, a conversion, or moving the unit to reclaim a closet. People use the words interchangeably; the paperwork does not.
Rather than reading everything, find the line that matches what’s happening.
No hot water at all. Could be ignition, the gas supply, a tripped limit or a failed element. What to check before calling covers the sequence, including the things worth trying yourself.
Hot water that runs out faster than it used to. Usually sediment stealing tank volume, a failed dip tube, or a unit that was undersized for how the household has changed. Covered in the symptom-by-symptom guide.
Rumbling, popping, rusty water or damp at the base. Each points somewhere specific, and the damp one is the urgent one. Same guide.
One flat has hot water and another doesn’t. That’s a building question before it’s a plumbing question — whether the system is shared, and which tank serves which unit. Water heater repair in flats covers tracing it.
An error code on a tankless unit. Codes cluster into families — ignition, flame loss, overheat, flow and venting — and knowing the family tells you how urgent it is. See tankless water heater repair.
Water on the floor right now. Stop reading and shut it off. Emergency replacement covers the shutoff order and what to do about the damage.
For a San Francisco address, usually same day for anything urgent, and we answer around the clock Monday through Saturday. We’re closed Sunday.
What moves faster than the booking is the phone call itself. If you have no hot water or you have water on the floor, we’ll work through the immediate steps with you while a technician is being dispatched, because stopping a leak matters more than our arrival time.
Two things genuinely speed up a visit. Photograph the data plate before we arrive — the label on the side with the model, serial and BTU input. It tells us the age, the capacity and what parts the unit takes, which often means the right part is on the van rather than ordered. And clear the access: a unit behind stored boxes in a garage or at the back of a closet costs real minutes on every visit.
Replacement timing is a separate number from repair timing. Same-day replacement is realistic for a standard swap where a common unit fits the existing space. It isn’t realistic for a conversion, a relocation, or anything needing a gas line upsize or a new vent penetration — those need a survey first, and anyone promising otherwise over the phone hasn’t measured.
Both work here. The deciding factors in this city are rarely the ones the marketing leads with.
Tank suits most San Francisco homes: lower install cost, no gas line or venting changes on a like-for-like swap, and simple to service. The downsides are the footprint and the finite capacity.
Tankless gives endless hot water and reclaims the closet, but feasibility turns on two things that have nothing to do with how much hot water you want — whether the gas run from the meter can deliver the demand, and whether a compliant vent termination exists on an accessible exterior wall. In a flat facing a narrow shared light well, that second one is frequently the answer, and it’s a no.
The honest version: the right question isn’t tank or tankless, it’s whether your building can take a tankless unit at all. We measure the gas run and look at the wall before recommending either. The full picture is in converting from tank to tankless, and the space, gas and venting constraints specific to flats are covered in water heater replacement in a small flat.
If the unit is going somewhere awkward either way, the two installation guides cover the building-stock problems: Victorian and Edwardian access and narrow stairs, and homes with no basement, where the closet is the installation.
No mystery, and it’s the same sequence whether you’ve called about a noise or a flood.
We find and read the data plate. Age, capacity, input rating, model. This frames every recommendation that follows and it takes a minute.
We test rather than guess. Gas supply and ignition on a gas unit, elements and thermostats on an electric one, flow and error history on a tankless. The aim is to identify the failed component, not to recognise a symptom.
We look at the installation, not just the appliance. Seismic strapping, the drain pan and its drain line, the temperature and pressure relief discharge, venting, combustion air and clearances. These are the items most often missing from an older install, and they matter whether or not they caused today’s problem.
We tell you what we found and what the options are — including when the honest answer is that the unit has years left and today is a part, or that a repair is possible but not sensible at its age. You get the reasoning, not just the recommendation.
You get it in writing. Every quote is written, itemised, and yours to compare against others.
We don’t publish figures, because the same job varies enormously between a garage in the Sunset and a rear flat with a hundred-foot gas run — a number on a page would be wrong for one of them.
What each route is priced against:
If you want to compare quotes properly, the line items to look for are set out in our guide to reading a water heater quote. Call (415) 359-4588 and we’ll book a visit and put ours in writing.
Across San Francisco — the Mission, Noe Valley, Bernal Heights, Potrero Hill, Glen Park, the Sunset and the Richmond — plus Daly City, Brisbane, South San Francisco and down the Peninsula to Burlingame.
JK Plumbing works under California contractors’ licence #1080266, and the licence is verifiable through the Contractors State License Board — worth checking for any contractor you’re considering, not only us.
Most water heater work in this city is decided by the building rather than the appliance: the stair it has to come up, the closet it has to fit in, the gas run it depends on, the wall the vent has to pass through. That’s the part we measure first.
Repair, replace or install — which one do you actually need?
Age and failure type decide it. Under eight years with a failed part is usually a repair. A leak from the tank body itself is always a replacement, at any age, because the steel has corroded through. Past twelve years, repairs rarely pay. Replacement means swapping a unit in the same place; installation means putting one where there wasn’t one, or moving it — which changes the permit and the quote.
How quickly can someone get out to you?
Usually same day in San Francisco for anything urgent, with calls answered around the clock Monday through Saturday and closed Sunday. Same-day replacement is realistic for a standard swap with a common unit. It is not realistic for a conversion, a relocation, or anything needing a gas line upsize or new vent penetration — those need a survey first.
Roughly what does each route cost?
We quote in writing after a visit rather than publishing figures, because the same job differs enormously between an accessible garage and a rear flat with a long gas run. Repairs price against the part and access. Replacements add removal, disposal, any missing code items and the permit. Conversions add gas work, vent path, electrical supply and condensate.
Tank or tankless for a San Francisco home?
Both work, but tankless feasibility is decided by the building, not the household. The gas run from the meter has to deliver the demand, and a compliant vent termination has to exist on an accessible exterior wall — in a flat facing a narrow shared light well, often it doesn’t. Tank units remain the simpler choice for a like-for-like swap.
What happens on the first visit?
We read the data plate for age, capacity and input rating, then test rather than guess — gas supply and ignition, elements and thermostats, or flow and error history depending on the unit. We check the installation itself: strapping, drain pan, relief discharge, venting, combustion air and clearances. Then you get the findings, the options with reasoning, and a written itemised quote.
Who fixes water heaters in San Francisco?
A licensed plumbing contractor. For gas units the work touches gas, venting and combustion air, which is why it is licensed work rather than handyman work. JK Plumbing holds California licence #1080266 and handles repair, replacement and installation across San Francisco, Daly City, Brisbane and the Peninsula. Any contractor’s licence can be checked on the CSLB website before you book.
JK Plumbing
Adress:1008 Edwards Rd Burlingame, CA 94010
Phone: (415) 359-4588
Hours: Open 24 hours, seven days a week.
Serving San Francisco, South San Francisco, Daly City, Brisbane and the Peninsula.
CA License #1080266


